Florida contractor licensing
Florida General Contractor License Requirements
Florida general contractor licensing starts with two decisions: whether the work needs a certified statewide license or a registered local path, and whether general, building, or residential scope fits the work. The correct application depends on those choices and on whether an individual will qualify a business.
Florida general contractor requirements at a glance
| Requirement | Verified value | Official source |
|---|---|---|
| First path decision | Certified statewide license or registered local path | DBPR current Construction Industry FAQs |
| Standard certified path | Exam, experience or education, financial responsibility, fingerprints, and application | DBPR current Requirements to become licensed as a certified contractor |
| General contractor liability minimum | $300,000 public liability + $50,000 property damage | DBPR CILB form current Insurance Coverage |
| Business entity | Must be qualified by a properly licensed individual contractor | DBPR current Construction Industry - Business Information |
| Renewal education checkpoint | At least 14 classroom hours during each biennium, subject to the statute and Board rules | Florida Statutes current F.S. 489.115(4)(b) |
Certified vs. registered contractor
A Florida certified contractor may contract statewide after meeting state certification requirements. A registered contractor relies on a local license or certificate of competency and may contract only in the local jurisdictions and categories covered by the registration.
| Path | Where it applies | Starting point |
|---|---|---|
| Certified | Statewide, within the license scope and statutory restrictions | State examination or another qualifying certification route, then DBPR licensure |
| Registered | Only covered local jurisdictions and registered work categories | Applicable local license or certificate of competency, then state registration |
General vs. building vs. residential license
Florida defines a general contractor as a contractor whose services are unlimited as to the type of work the contractor may do and who may contract for or perform work requiring licensure under Part I of Chapter 489, except where Section 489.113 expressly provides otherwise.
General, building, and residential contractor licenses have different statutory scopes. General contractor scope is broad but remains subject to Section 489.113; building contractor scope includes specified commercial and residential buildings and certain remodeling; residential contractor scope is limited to specified one-family, two-family, and three-family residences and accessory structures.
A broad general contractor license does not automatically replace separately licensed electrical, plumbing, roofing, mechanical, air-conditioning, and other trade credentials. Florida Statutes section 489.113 controls when those activities must be subcontracted or separately licensed.
Certified general contractor checklist
- Confirm that the general category fits the planned work.
- Choose the certified statewide or registered local path.
- For certification, complete the required examination or establish eligibility for another authorized route.
- Document the applicable experience or education method shown in the current CILB application.
- Complete electronic fingerprinting and the required background disclosures.
- Prepare the active-license financial responsibility and stability records.
- Meet the liability insurance and workers’ compensation or exemption checkpoint.
- Use the DBPR form that matches an individual, qualifying-business, endorsement, or other transaction.
- Verify the issued individual and business records in DBPR's official search.
Exam and experience requirements
The standard certified-contractor path requires completion of the Florida contractor examination, financial stability and responsibility, and proof of experience for the requested category. Endorsement is a separate path with separate eligibility requirements.
Applicants need four years of experience or an allowed combination of college and experience. The current CILB 5-A application lists multiple qualification methods and requires category-specific experience documentation.
Passing an exam alone does not create a license. The application still must support the selected qualification method and satisfy the other licensing checks.
Fingerprints and financial responsibility
Electronic fingerprinting is mandatory for construction initial-license, initial-business, additional-business, transfer, and endorsement applications covered by the current CILB instructions.
The current active-license application requires a credit report with a FICO-derived score and public-records statement. It states that a score of 660 or higher satisfies the financial-stability measure; an applicant below 660 must provide proof of an approved 14-hour financial responsibility course.
Insurance and workers’ compensation
For an active general contractor license, the current CILB 5-A form lists minimum coverage of $300,000 public liability and $50,000 property damage. It also requires workers' compensation coverage or an applicable exemption under the form's instructions.
These are licensing checkpoints from the current state form, not insurance purchasing advice or a premium estimate. Use the current application and Florida workers’ compensation instructions for your circumstances.
Individual license vs. qualifying a business
A Florida construction business operating as an entity other than a sole proprietor must be approved to be qualified by a properly licensed individual contractor. The approved business entity is associated with the contractor's individual license.
- CILB 5-A: certified general contractor applying as an individual.
- CILB 6-A: certified general contractor qualifying one business.
- Other transactions: additional business, endorsement, status changes, and registered paths use different DBPR forms.
Official Florida application path
DBPR's Construction Industry page routes general contractor applicants to the examination application, certified-individual application, qualifying-business application, endorsement forms, and other transaction-specific forms. The correct form depends on the applicant and business path.
Start from the DBPR Construction Industry application page so the current form and instructions determine the route. This guide does not publish one application fee because the amount can vary by transaction and timing; confirm it in the current DBPR form before paying.
Renewal and continuing education
Each certificateholder or registrant must provide proof of at least 14 classroom hours of qualifying continuing education during each biennium, subject to the statute and Board rules.
Check the current DBPR renewal notice for the license's deadline, status, reporting requirements, and fee rather than relying on an older form or a third-party deadline.
Official Florida contractor license lookup
Florida DBPR's official license search supports searches by name, license number, city or county, and license type. Check both the individual contractor and the associated business entity when applicable.
Open the official DBPR Verify a Licensee search. Confirm the license type and status, and compare both the individual and business records when a contractor qualifies a company. ContractorRegGuide does not operate the state database.
Official sources
- https://www2.myfloridalicense.com/construction-industry/faqs/ DBPR current · Construction Industry FAQs / Requirements to become licensed as a certified contractor
- https://www.leg.state.fl.us/Statutes/index.cfm?App_mode=Display_Statute&URL=0400-0499/0489/Sections/0489.105.html Florida Statutes current · F.S. 489.105(3)(a) / F.S. 489.105(3)(a)-(c)
- https://www.myfloridalicense.com/CheckListDetail.asp?SID=&XACT_DEFN_ID=18296&b5e02b6d_page=3&clientCode=0605&xactCode=1042 DBPR current · Certified General Contractor as an Individual - Active
- https://www2.myfloridalicense.com/pro/cilb/documents/CILB6A_Certified_Contractor_Qualifying_Business_General.pdf DBPR CILB form current · Instructions - General Requirements for Certification
- https://www2.myfloridalicense.com/pro/cilb/documents/CILB5A_Certified_Contractor_Individual_General.pdf DBPR CILB form current · Financial Responsibility and Stability - Active Applicants Only / Insurance Coverage
- https://www2.myfloridalicense.com/construction-industry/construction-industry-business-information/ DBPR current · Construction Industry - Business Information
- https://www2.myfloridalicense.com/construction-industry/ DBPR current · Apply For A License - General
- https://www.leg.state.fl.us/Statutes/index.cfm?App_mode=Display_Statute&URL=0400-0499/0489/Sections/0489.115.html Florida Statutes current · F.S. 489.115(4)(b)
- https://www.myfloridalicense.com/wl11.asp?lookup=1&mode=0 DBPR current · DBPR Online Services - Verify a Licensee
FAQ
How do I get a general contractor license in Florida?
First decide whether you need a certified statewide license or a registered local path. The standard certified path includes the Florida contractor examination, an accepted experience or education route, financial responsibility documentation, fingerprints, insurance, and the application that matches whether you will qualify a business.
What is the difference between a certified and registered contractor in Florida?
A certified contractor can contract statewide after meeting state certification requirements. A registered contractor relies on a local license or certificate of competency and is limited to the jurisdictions and categories covered by that registration.
How much experience is required for a Florida general contractor license?
DBPR describes the requirement as four years of experience or an accepted combination of college and experience. The current CILB application lists several qualification methods, so applicants should match their records to the method they select.
What insurance does a Florida general contractor need for an active license?
The current CILB 5-A form lists $300,000 public liability and $50,000 property damage for general and building contractors. It also asks for workers’ compensation coverage or an applicable exemption.
Where can I verify a Florida contractor license?
Use the official Florida DBPR Verify a Licensee search. Search the individual contractor and the associated business entity when the contractor qualifies a company.